Hastelloy Round Bar is composed of a nickel-based molybdenum-chromium alloy that has 14.5% chromium and 15% molybdenum. The material is incredibly strong and very resistant to temperature changes, and corrosion. Aashish Steel Steel produces a range of Hastelloy Round Bar goods in different dimensions and sizes.
As a result hastelloy round bar is made especially to provide higher strength and corrosion resistance in high-temperature and high-stress conditions, it is often stronger than stainless steel round bar. Nickel, chromium, molybdenum, and tungsten are among the elements that go into making hastelloy alloys, which give them remarkable strength and resistance to corrosion. While stainless steel is an alloy that resists corrosion as well, it often lacks Hastelloy's strength and resistance to corrosion. The precise strength and characteristics of any material can, however, differ based on the grade and purpose of the material.
High temperatures are used to shape hot rolled round bars, which gives them good ductility and reduced hardness. This makes them ideal for broad structural applications where accuracy is not as important. By processing cold drawn round bars at room temperature, on the other hand, their strength and hardness are enhanced along with their surface finish, which makes them perfect for applications demanding tight tolerances and precision machining. To relieve internal tensions and improve ductility and workability, heat treatment is the final step for annealed round bars. Higher formability and durability are required in some applications, and this state offers superior corrosion resistance.

Table of Content
Hastelloy alloy square bars are designed for high-temperature applications, with specific grades offering varying capabilities. For example, Hastelloy C-276 can withstand temperatures up to about 1500°F (815°C), making it suitable for challenging environments. Hastelloy C-22 is effective up to around 1250°F (675°C) and provides strong resistance to pitting and oxidation. Hastelloy B-2 is also rated for 1500°F but is best used in reducing conditions. Meanwhile, Hastelloy S can handle temperatures as high as 2100°F (1150°C), making it ideal for demanding applications like gas turbines. Knowing these temperature limits helps ensure the right choice for specific needs.
We are Importer, Trader of Hastelloy Round Bar Manufacturer in India. It is used in • Power Generation Industry & Aerospace and Défense Industry. Supplies in Various Countries Like Qatar, Dubai, Oman, Lebanon, Turkey, Malaysia etc
Hastelloy Round Bar Specification
Hastelloy Bar Sizes
Hastelloy Alloy Flat Bar Length & Tolerance
ASME SB574 Bar Temprature Range & Melting Point
Hastelloy Round Bar Supplier In India View Finishes
Conditions of ASME SB574 Angle Bar
Manufacturing Technique of Hastelloy Alloy Rod
ASTM B574 Hot Rolled Bars Application
Hastelloy Forged Cold Drawn Bar Benefits
ASTM B574 Precision Rod Value Added Services

Hastelloy Peeled Round Bars Test Certificates
Hastelloy Steel Bright Bar Documentation
Testing Methods of Hastelloy Steel Rod
ASME SB574 Hastelloy Flat Bar Features
Hastelloy Metal Alloy Square Bar Marking
Hastelloy Hex Bar
Hastelloy Alloy Round Bar
ASTM B574 Hastelloy Square Bar
Hastelloy Metal Alloy Flat Bar
ASME SB574 Hastelloy Bright Bar
Hastelloy Steel Threaded Bar
Hastelloy Alloy Accuracy Bar
Hastelloy Metal Bearing Quality Bar
Hastelloy Pump Shaft Quality Bar
ASTM B574 Alloy Hastelloy Sheared & Edged Bar
Hastelloy Steel Rolled Flat Bar
ASME SB574 Hastelloy Half Round Bar
Hastelloy Alloy Rod
Hastelloy ASTM B574 Square Black Bar
Hastelloy Metal Alloy Triangle Bar
Hastelloy round bars come with specific tolerance standards that ensure quality and precision. Generally, diameter tolerances are around ±0.005 inches for bars up to 2 inches in diameter, with slightly larger tolerances for bigger sizes. Length tolerances typically range from ±1/8 inch or ±0.5% of the total length. Straightness is often maintained within 1/8 inch per foot, while roundness should meet specific standards, usually around ±0.005 inches. These tolerances comply with ASTM specifications, ensuring that the bars are suitable for various applications requiring high strength, corrosion resistance, and precise machining. Custom tolerances may also be available from manufacturers.
Weight Chart of ASTM B574 Hastelloy Round Bar Per Linear Foot
| Diameter (inches) | Diameter (mm) | Weight per Foot (lbs) | Weight per Meter (kg) |
|---|---|---|---|
| 1-3/8 | 34.93 | 1.687 | 5535 |
| 1-1/8* | 28.58 | 1.108 | 3.635 |
| 5/16" | 7.93 | 0.085 | 0.279 |
| 1/4 | 6.35 | 0.054 | 0.177 |
| 3/8* | 953 | 0.122 | 0.399 |
| 1-1/4" | 31.75 | 1.380 | 4528 |
| 3/4" | 19.05 | 0.488 | 1.601 |
| 1/2 | 12.70 | 0.217 | 0.711 |
| 5/8 | 15.88 | 0.339 | 1.112 |
| 1-3/4" | 4445 | 2.840 | 9.318 |
| 2-1/ 4 | 57.15 | 4.620 | 15.122 |
| 1 | 25.40 | 0.871 | 2.858 |
| 2 | 50.80 | 3.670 | 12.044 |
| 7/8" | 22.23 | 0.667 | 2.188 |
| 1-1 / 2 | 38.10 | 2.030 | 6.657 |
Equivalent Chart of ASME SB574 Hastelloy Round Bars
| Grade | UNS | WERKSTOFF NR. | JIS | EN | OR | GOST |
|---|---|---|---|---|---|---|
| C276 | N10276 | 2.4819 | NW 0276 | NiM016Cr15W | 76o | XH65MBY |
| C22 | No6022 | 2.4602 | NW 6022 | NiCr21M014W | ||
| B2 | N10665 | 2.4617 | ||||
| X | No6002 | 2.4665 |
Hastelloy Steel Bright Bar Mechanical Properties
Hastelloy round bars are recognized for their remarkable density and mechanical attributes. With a typical density ranging from 8.0 to 9.0 g/cm³, these alloys serve as a robust foundation for a variety of applications. Their tensile strength spans from 70 to 140 ksi, while the yield strength generally lies between 30 to 120 ksi. Exhibiting elongation rates of approximately 30% or greater, they demonstrate outstanding ductility. The hardness typically falls within the range of 30 to 40 HRC, and the bars retain commendable impact toughness even at lower temperatures. These properties render Hastelloy round bars particularly suitable for challenging environments in sectors such as chemical processing and aerospace.
| Grade | Tensile Strength | Yield Strength (0.2%Offset) | Density | Melting Point | Elongation |
|---|---|---|---|---|---|
| C276 | Psi – 1,15,000, MPa – 790 | Psi - 52,000, MPa - 355 | 8.89 G/Cm3 | 1370 °C (2500 °F) | 40 % |
| C22 | Psi – 1,00,000, MPa – 690 | Psi - 45000, MPa - 310 | 8.6 G/Cm3 | 1399 °C (2550 °F) | 45 % |
| B2 | Psi – 1.10.000, MPa – 760 | Psi - 51000, MPa - 350 | 9.0 G/Cm3 | 1370 °C (2500 °F) | 40 % |
| X | MPa – 655 | MPa - 240 | 8.22 G/Cm3 | 1355 °C | 35 % |
How Does the Density of Hastelloy Round Bar Compare to Other Materials?
The density of Hastelloy round bars typically ranges from 8.0 to 9.0 g/cm³, depending on the specific alloy.
| Material | Density (g/cm³) |
|---|---|
| Hastelloy | 8.0 - 9.0 |
| Stainless Steel | 7.9 |
| Titanium | 4.5 |
| Aluminum | 2.7 |
| Copper | 8.9 |
Are All Hastelloy Grades Suitable for High-temperature Applications?
Not all Hastelloy grades are equally suitable for high-temperature applications. While many Hastelloy alloys are designed to withstand elevated temperatures,
| Hastelloy Grade | High-Temperature Suitability | Key Properties |
|---|---|---|
| C-276 | Excellent | Maintains strength and corrosion resistance |
| C-22 | Good | Good oxidation resistance and strength |
| B-2 | Not recommended | Best for reducing environments |
Does Heat Treatment Affect Hardness?
Yes, heat treatment significantly affects the hardness of Hastelloy alloys. The specific effects can vary depending on the grade and the type of heat treatment applied.
| Heat Treatment | Hardness Effect |
|---|---|
| Annealing | Reduces hardness, increases ductility |
| Aging | Increases hardness (some grades) |
| Cold Working | Increases hardness, reduces ductility |
| Quenching | Variable hardness, depends on alloy |
| Solution Treatment | Moderate effect on hardness |
Does the Fabrication Process Depend on the Working Temperature?
Yes, the fabrication process of Hastelloy round bars does depend on the working temperature. Here are some key points to consider:
| Fabrication Process |
|---|
| Machining |
| Welding |
| Heat Treatment |
| Forming |
| Thermal Cycling |
| Selection |
How Does Thickness Affect Properties?
The characteristics of Hastelloy round bars are greatly impacted by thickness in a number of ways.
| Property | Thicker Bars | Thinner Bars |
|---|---|---|
| Strength | Higher strength | Lower strength |
| Ductility | Better ductility | might be less robust |
| Corrosion Resistance | Slightly better | More easily affected by pitting |
| Heat Treatment | Longer heating/cooling times | Quick to heat/cool |
| Machinability | Requires robust techniques | Easier to machine |
| Weldability | Needs preheating | Standard practices apply |
Hastelloy round bars are available in several finishes, including hot rolled, cold drawn, annealed, and polished, each tailored for different applications. The hot rolled finish is rough and suitable for general use, while cold drawn offers tighter tolerances and improved surface quality for precision machining. The annealed finish enhances workability and corrosion resistance, making it ideal for demanding environments. In terms of chemical composition, common grades like Hastelloy C-276 contain nickel, molybdenum, and chromium, providing exceptional resistance to corrosion and high temperatures. These properties make Hastelloy round bars highly versatile for industries such as chemical processing and aerospace.
Hastelloy Metal Rounds Chemical Composition
| Grade | Mn | P | C | Cr | Si | Ni | Mo | Fe | Co | S |
| C276 | 1.00 max | 0.04 max | 0.010 max | 14.50-16.50 | 0.08 max | 50.99 min | 15.00-17.00 | 4.00-7.00 | 2.50 max | 0.03 max |
| C22 | 0.50 max | 0.02 max | 0.010 max | 20.00-22.50 | 0.08 max | 50.015 min | 12.50-14.50 | 2.00-6.00 | 2.50 max | 0.02 max |
| B2 | 1.0 max | 0.04 max | 0.02 max | 1.0 max | 0.03 max | Bal | 26-30 | 2.0 max | 0.1 max | 1.0 max |
| X | 1.00 max | 0.04 max | 0.05-0.15 | 20.50-23.00 | 1.00 max | Bal | 8.00-10.00 | 17.00-20.00 | 0.50-2.50 | 0.03 max |
Delivery Timetable of Hastelloy Alloy Round Bar
| Country | Country Name | Delivery Time |
|---|---|---|
| Saudi Arabia | 7 days | |
| Brazil | 45-60 days | |
| Egypt | 18 days | |
| South Africa | 25-30 days | |
| Indonesia | 9 days | |
| Australia | 60 days | |
| UAE/ Dubai | 5 days | |
| Jordan | 21 days | |
| Singapore | 8 days | |
| Thailand | 7 days |
Copyright © 2024 Aashish Steel | All rights reserved. Design & SEO By MESOTEK